High temperature nanoindentation of (U,Ce)O compounds

Frazer, D.*; Saleh, T. A.*; Matsumoto, Taku; Hirooka, Shun; Kato, Masato; McClellan, K.*; White, J. T.*

Nuclear Engineering and Design, 423, p.113136_1 - 113136_7, 2024/07

https://doi.org/10.1016/j.nucengdes.2024.113136

Nanoindentation based techniques can be employed on minute volumes of material to measure mechanical properties, including Young's modulus, hardness, and creep stress exponents. In this study, (U,Ce)O solid solutions samples are used to develop elevated temperature nanoindentation and nanoindentation creep testing methods for use on mixed oxide fuels. Nanoindentation testing was performed on 3 separate (Ux-1,Cex)O compounds ranging from x equals 0.1 to 0.3 at up to 800 C: their Young's modulus, hardness, and creep stress exponents were evaluated. The Young's modulus decreases in the expected linear manner while the hardness decreases in the expected exponential manner. The nanoindentation creep experiments at 800 C give stress exponent values, n=4.7-6.9, that suggests dislocation motion as the deformation mechanism.

A Science-based mixed oxide property model for developing advanced oxide nuclear fuels

Kato, Masato; Oki, Takumi; Watanabe, Masashi; Hirooka, Shun; Vauchy, R.; Ozawa, Takayuki; Uwaba, Tomoyuki; Ikusawa, Yoshihisa; Nakamura, Hiroki; Machida, Masahiko

Journal of the American Ceramic Society, 107(5), p.2998 - 3011, 2024/05

https://doi.org/10.1111/jace.19609

Contribution to risk reduction in decommissioning works by the elucidation of basic property of radioactive microparticles (Contract Research); FY2020 Nuclear Energy Science & Technology and Human Resource Development Project

Collaborative Laboratories for Advanced Decommissioning Science; Ibaraki University*

JAEA-Review 2023-021, 112 Pages, 2024/02

JAEA-Review-2023-021.pdf:7.1MB

The Collaborative Laboratories for Advanced Decommissioning Science (CLADS), Japan Atomic Energy Agency (JAEA), had been conducting the Nuclear Energy Science & Technology and Human Resource Development Project (hereafter referred to "the Project") in FY2020. The Project aims to contribute to solving problems in the nuclear energy field represented by the decommissioning of the Fukushima Daiichi Nuclear Power Station, Tokyo Electric Power Company Holdings, Inc. (TEPCO). For this purpose, intelligence was collected from all over the world, and basic research and human resource development were promoted by closely integrating/collaborating knowledge and experiences in various fields beyond the barrier of conventional organizations and research fields. The sponsor of the Project was moved from the Ministry of Education, Culture, Sports, Science and Technology to JAEA since the newly adopted proposals in FY2018. On this occasion, JAEA constructed a new research system where JAEA-academia collaboration is reinforced and medium-to-long term research/development and human resource development contributing to the decommissioning are stably and consecutively implemented. Among the adopted proposals in FY2018, this report summarizes the research results of the "Contribution to Risk Reduction in Decommissioning Works by the Elucidation of Basic Property of Radioactive Microparticles" conducted from FY2018 to FY2021 (this contract was extended to FY2021). The present study aims to understand the basic properties (size, chemical composition, isotopic composition - including concentration of -emitters, electrostatic properties, and optical properties, etc.) of fine particles composed of silicate with insoluble properties which contain regions of highly concentrated radioactive cesium (Cs) released to the environment by the accident at the Fukushima Daiichi Nuclear Power Station of TEPCO in 2011 March.

Development of genetic and electrochemical diagnosis and inhibition technologies for invisible corrosion caused by microorganisms (Contract research); FY2022 Nuclear Energy Science & Technology and Human Resource Development Project

Collaborative Laboratories for Advanced Decommissioning Science; National Institute for Materials Science*

JAEA-Review 2023-031, 101 Pages, 2024/01

JAEA-Review-2023-031.pdf:24.47MB

The Collaborative Laboratories for Advanced Decommissioning Science (CLADS), Japan Atomic Energy Agency (JAEA), had been conducting the Nuclear Energy Science & Technology and Human Resource Development Project (hereafter referred to "the Project") in FY2022. The Project aims to contribute to solving problems in the nuclear energy field represented by the decommissioning of the Fukushima Daiichi Nuclear Power Station (1F), Tokyo Electric Power Company Holdings, Inc. (TEPCO). For this purpose, intelligence was collected from all over the world, and basic research and human resource development were promoted by closely integrating/collaborating knowledge and experiences in various fields beyond the barrier of conventional organizations and research fields. The sponsor of the Project was moved from the Ministry of Education, Culture, Sports, Science and Technology to JAEA since the newly adopted proposals in FY2018. On this occasion, JAEA constructed a new research system where JAEA-academia collaboration is reinforced and medium-to-long term research/development and human resource development contributing to the decommissioning are stably and consecutively implemented. Among the adopted proposals in FY2020, this report summarizes the research results of the "Development of genetic and electrochemical diagnosis and inhibition technologies for invisible corrosion caused by microorganisms" conducted from FY2020 to FY2022. The present study aims to develop innovative diagnostic techniques such as accelerated test specimens and on-site genetic testing for microbially induced and accelerated corrosion of metallic materials (microbially influenced corrosion, MIC), and to identify the conditions that promote MIC at 1F for proposing methods to prevent MIC through water quality and environmental control.

Multi-aspect characterization of low-temperature tempering behaviors in high-carbon martensite

Zhang, Y.*; Marusawa, Kenji*; Kudo, Kohei*; Morooka, Satoshi; Harjo, S.; Miyamoto, Goro*; Furuhara, Tadashi*

ISIJ International, 64(2), p.245 - 256, 2024/01

https://doi.org/10.2355/isijinternational.ISIJINT-2023-251

Neutron flux estimation and neutronics characteristics calculation in post-JMTR conceptual study

Oizumi, Akito; Akie, Hiroshi

JAEA-Technology 2023-017, 93 Pages, 2023/12

JAEA-Technology-2023-017.pdf:8.45MB

After the decision of decommissioning JMTR (Japan Materials Testing Reactor), Japan Atomic Energy Agency investigated the possibility to construct a new irradiation test reactor to succeed JMTR (post-JMTR), and the final report of the investigated result was submitted to the Ministry of Education, Culture, Sports, Science and Technology on March 30th 2021. This investigation was carried out in 4 steps of (1) selection of reactor type, (2) reactor core plans studies, (3) neutronic studies, (4) thermal studies, and was finally (5) considered and evaluated. This JAEA-Technology report summarizes the process and the results of (3) neutronic studies. Neutron fluxes were calculated at irradiation sample positions in the investigated cores, the standard core and the compact core, and the calculated fluxes satisfied the required irradiation capability. It was also evaluated the two investigated cores' continuous reactor operation time in days in one refueling cycle, and the results guaranteed an operation days equality with that of existing JMTR. In addition, neutronic characteristics of the cores were estimated, such as power distribution in the core, control rod reactivity worth, reactivity coefficients, distribution of fuel burnup rate of each fuel element, and kinetics parameters. The evaluated neutronic characteristics were used in the post-JMTR final investigation report to confirm the neutronic feasibility by comparing with the neutronic limiting values of existing JMTR, and to estimate the cooling capability to make the core thermally feasible.

Synergistic effect of aluminum lactate and sodium molybdate on freshwater corrosion of carbon steel under irradiation

Otani, Kyohei; Kato, Chiaki; Igarashi, Takahiro

Corrosion, 79(11), p.1277 - 1286, 2023/11

https://doi.org/10.5006/4386

An Estimation method for an unknown covariance in cross-section adjustment based on unbiased and consistent estimator

Maruyama, Shuhei; Endo, Tomohiro*; Yamamoto, Akio*

Journal of Nuclear Science and Technology, 60(11), p.1372 - 1385, 2023/11

https://doi.org/10.1080/00223131.2023.2203707

Criticality safety evaluation of high active liquid waste during the evaporation to dryness process at Tokai Reprocessing Plant

Miura, Takatomo; Kudo, Atsunari; Koyama, Daisuke; Obu, Tomoyuki; Samoto, Hirotaka

Proceedings of 12th International Conference on Nuclear Criticality Safety (ICNC2023) (Internet), 10 Pages, 2023/10

Tokai Reprocessing Plant (TRP) had reprocessed 1,140 tons of spent fuel discharged from commercial reactors (BWR, PWR) and Advanced Thermal Reactor "Fugen" from 1977 to 2007. TRP had entered decommissioning stage in 2018. In order to reduce the risk of High Active Liquid Waste (HALW) held at the facility, the vitrification of HALW is given top priority. HALW generated from reprocessing of spent fuel contains not only fission products (FPs) but also trace amounts of uranium (U) and plutonium (Pu) within the liquid and insoluble residues (sludge). Under normal conditions, concentrations of U and Pu in HALW are very low so that it can not reach criticality. Since FPs with high neutron absorption effect coexists in HALW, even if the cooling function is lost due to serious accident and HALW evaporates to dryness, it is considered that criticality would not been reached. In order to confirm this estimation quantitatively, criticality safety evaluations were carried out for the increase of U and Pu concentrations by evaporation of HALW to the point of dryness. In this evaluation, infinite multiplication factors were calculated for each of solution system and sludge system of HALW with respect to the concentration change through evaporation to dryness. It is confirmed it could not reach criticality. The abundance ratios of U, Pu and FPs were set conservatively based on analytical data and ORIGEN calculation results. Multiplation factors for two-layer infinite slab model of solution and sludge systems of HALW were also calculated, and it was confirmed it could not reached criticality. In conclusion, the result was gaind that there could be no criticality even in the process through evaporation to dryness of HALW in TRP.

Comparative study of a glovebox dismantling facility for manual and remote glovebox dismantlement activities

Kitamura, Akihiro; Hirano, Hiroshi*; Yoshida, Masato

Nuclear Engineering and Design, 411, p.112435_1 - 112435_14, 2023/09

https://doi.org/10.1016/j.nucengdes.2023.112435

This study presents the features and brief history of the glovebox dismantling facility and the primary dismantlement results. Subsequently, we evaluate the novelties of the facility from operational experiences in manual and remote glovebox dismantlement methods and discuss their characteristics. Furthermore, we evaluate the worker exposure dose based on the obtained data. Finally, we show how these experiences are effectively fed back to the technological dismantlement development for our decommissioning project.